- Bearing Machine Development Co., Ltd
- CYLINDRICAL ROLLER BEARING DOUBLE CYLINDRICALROW BEARING FOUR ROW TQO TAPERED ROLLER BEARING
English
Home>Products>Rotary Table Bearings>Doosan DH60-7 Excavator Slewing Bearing
Doosan DH60-7 Excavator Slewing Bearing MODELS
Need a CAD or 3D Model?
Doosan DH60-7 Excavator Slewing Bearing
category
Rotary Table Bearings
Doosan DH60-7 Excavator Slewing Bearing SPECIFICATIONS
- 0.2500 in
- Steel
- 6.5 °
- Bronze
- 1 in
- 2250 lb
- Male Threaded
- -30 to +300 °F
-
Bearing Machine Development Co., Ltd2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Doosan DH60-7 Excavator Slewing Bearing Systems
- 0.2500 in
- Steel
- 6.5 °
- Bronze
- 1 in
- 2250 lb
- Male Threaded
- -30 to +300 °F
- 1/4-28 in
- 3/4 in
- Left Hand
- 0.281 in
- Precision
- 3/8 in
- With Lubrication Fitting
- 1.562 in
- Steel
Doosan DH60-7 Excavator Slewing Bearing Cross reference
| Dimension E | 2.957 in |
| Bolt Hole Size N | 17.1 mm |
| Center of Bearing from Housing End A2 | 1.242 mm |
| Inside Ring Outside Diameter | 2.980 in |
| Flange Thickness A1 | 16.7 mm |
| Bearing Type | Ball Bearing |
| Inside Ring Width B | 0 mm |
| Shaft Size d | 2 1/8 in |
| Static Load Rating | 6570 lbf |
| Total Length H | 215.9 mm |
| Weight | 8.087 lb |
| Total Height L | 127 mm |
| Dynamic Load Rating | 10800 lbf |
| Series | Industrial |
| Bearing Number | G1202KLLB |
| Bolt Hole Spacing J | 184.1 mm |
| e | 0.105 in |
| Housing Width A | 46.8 mm |
| Seal Type | Labyrinth Seal |
| Housing Style | Two-Bolt Flange |
Doosan DH60-7 Excavator Slewing Bearing Cross Reference | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | D | R | e | r | d | a | C | B |
| LM104947/LM104911 | FBJ | 82,55 mm | - | - | - | 49,987 mm | - | 69,5 kN | 22,225 mm |
| LM104947A/11 | Loyal | 82,55 mm | - | - | - | 49,987 mm | 5,8 mm | 75,2 kN | 22,225 mm |
| LM104947A/JLM104910 | Timken | 82 mm | 0,5 mm | - | 0,5 mm | 49,987 mm | - | 17 mm | 22,225 mm |
| LM104947A/LM104911 | NSK | 82,55 mm | - | 0.31 | - | 50 mm | 15,7 mm | 71 kN | 22,225 mm |
| JLMI04947A/JLM104910 | AST | 82 | - | - | - | 50 | - | - | - |
| 4T-LM104947A/LM104911 | NTN | 82,55 mm | - | - | - | 49,987 mm | 5,8 mm | 69,5 kN | 22,225 mm |
| LM104947A-90010 | TIMKEN | 3.228 Inch | 81.991 Millimeter | - | - | - | 1.968 Inch | 49.987 Millimeter | - | - | - |
| M554947DGW-902A2 | TIMKEN | - | - | - | - | - | - | - | - |
| M554947DGW-2 | TIMKEN | 0 Inch | 0 Millimeter | - | - | - | 11 Inch | 279.4 Millimeter | - | - | 5.31 Inch | 134.874 Millimeter |
| T74947-10 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| LM104947A-60000/LM104911-60000 | TIMKEN | 3.25 Inch | 82.55 Millimeter | - | - | - | 1.968 Inch | 49.987 Millimeter | - | - | - |
| 011.25.400 External Teeth UWE Slewing Bearing/slewing Ring | Dimension R:22.5 in; Dimension H:5.4 in; Series Type:Medium Series; Seal Type:Kevlar Packing Seal; Dimension P:1.3 in; Shaft Size:7.25 in; Bolt Size:4 x M30; Maximum Speed:960 rpm; Bearing Number:MSE704BR; Support Type:Round Flange; Dimension N:19.375 in; Cr - Dynamic Load Rating:227732 lbf; Cor - S |
| 011.25.450 External Teeth UWE Slewing Bearing/slewing Ring | Dimension J:20.2 in; Note:This product line wa; Bearing Type:Split Cylindrical Ex; Dimension L:24.5 in; Shipping Weight:655 lb; Cor - Static Load Rating:284383 lbf; Dimension H2:19.1 in; Shaft Size:135 mm; Dimension M:7.0 in; Seal Type:Kevlar Packing Seal; Maximum Speed:1340 rpm; Housing Width:8.5 i |
| 011.25.560 External Teeth UWE Slewing Bearing/slewing Ring | Static Load Rating:985000 lbf; D - Bearing O.D.:9.8750 in; d - Bore Diameter:4.5000 in; Bearing Configuration:Thrust TTHD - with c; Bearing Type:Thrust Tapered Rolle; r - Fillet Radius Housing (Max):0.16 in; R - Fillet Radius Shaft (Max):0.16 in; Dynamic Load Rating:79100 lbf; Weight:31.3 lb; B:2.12 |
| 012.25.560 External Teeth UWE Slewing Bearing/slewing Ring | B - Cone Width:67.673 mm; Y - ISO Factor9:1.55; G2 - Heat Generation Factor (Rib-Roller End):240; Aa - Cage-Cone Backface Clearance:7.4 mm; Cone Part Number:EE128111; Cg - Geometry Factor:0.159; G1 - Heat Generation Factor (Roller-Raceway):1620; Da - Cup Frontface Backing Diameter:384.30 mm; db - Co |
| 011.30.500 External Teeth UWE Slewing Bearing/slewing Ring | Design Units:Imperial; e - ISO Factor3:0.47; Series:08000; D:2.3125 in; Cup Part Number:08231-B; D1 - Flange Outer Diameter:2.4645 in; C1 - Cup Flange Width:0.1090 in; G1 - Heat Generation Factor (Roller-Raceway)5:1.07; Cg - Geometry Factor6:0.0601; Y - ISO Factor4:1.27; G2 - Heat Generation Factor |
| 011.30.560 External Teeth UWE Slewing Bearing/slewing Ring | Cup Part Number:380190; C0 - Static Radial Rating:453000 lbf; Cage Type:Pin-Type; db - Cone Backface Backing Diameter:277.11 mm; a - Effective Center Location3:34.3 mm; r - Cup Backface To Clear Radius2:6.35 mm; Design Units:Imperial; Aa - Cage-Cone Backface Clearance:22.6 mm; Ab - Cage-Cone Frontfa |
| 012.30.560 External Teeth UWE Slewing Bearing/slewing Ring | Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - M/N Seal:1600 rpm; Dimension D Min:7.60 in; Eng Internal Radial Clearance - Max:0.0031; Dimension B:6.60 in; Dimension L:3.94 in; Dimension H:1.29 in; Dimension RAA:0.88 in; Dimension E:1.88 in; Grease Lubrication - T Seal:2400 rpm; Full Timke |
| 012.30.500 External Teeth UWE Slewing Bearing/slewing Ring | K - Factor8:1.72; Ab - Cage-Cone Frontface Clearance:0.04 in; Design Units:Imperial; a - Effective Center Location4:-0.26 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:2290 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:3940 lbf; C1 - Dynamic Radial Rating (1 million revolut |
| 011.25.500 External Teeth UWE Slewing Bearing/slewing Ring | C0 - Static Radial Rating:3040000 N; Design Units:METRIC; Cg - Geometry Factor3:0.1916; B - Outer Ring Width:106.000 mm; Reference Thermal Speed Rating (Oil)2:740; D:420 mm; d:280.000 mm; C - Inner Ring Width:106.000 mm; C - Dynamic Radial Rating1:1690000 N; R - Inner Ring To Clear Radius4:3.0 mm; d |
| 012.25.500 External Teeth UWE Slewing Bearing/slewing Ring | t:2.5 mm; Weight:205 g; D5:231 mm; S:16 mm; D1:190 mm; k:184.0 mm; Locknut:KML38; D4:210 mm; E:20 mm; No. of Tangs:19; |
Doosan DH60-7 Excavator Slewing Bearing Video
Contact Us
- Bearing Machine Development Co., Ltd
- AddressWellington Crescent, Fradley Park, Lichfield, Staffordshire, WS11 8RZ, UK
- Phone(Working Time)
- Fax
Rotary Table Bearings CATEGORIES
- CYLINDRICAL ROLLER BEARING
- DOUBLE CYLINDRICALROW BEARING
- FOUR ROW TQO TAPERED ROLLER BEARING
- FULL DOUBLE CYLINDRICAL ROLLER BEARING
- MULTIROW CYLINDRICAL ROLLER BEARING
- SINGLE ROW CYLINDRICAL ROLLER BEARING
- V FLAT THRUST BEARING
- DOUBLE ROW TAPERED ROLLER TDO BEARING
- FULL SINGLE CYLINDRICAL ROLLER BEARING
- SINGLE ROW TAPERED ROLLER BEARING
- SPHERICAL ROLLER BEARING
- DEEP GROOVE BALL BEARING
- NOK SEAL
- SKF CR SEALS
- TIMKEN NATIONAL SEALS
- Ball screw bearing
- Spherical Roller Bearing
- Rotary Table Bearings
- THK Bearing
- SKF Bearing
- KAYDON Bearings
011.25.400 External Teeth UWE Slewing Bearing/slewing Ring
011.25.450 External Teeth UWE Slewing Bearing/slewing Ring
011.30.500 External Teeth UWE Slewing Bearing/slewing Ring
012.30.500 External Teeth UWE Slewing Bearing/slewing Ring
011.25.500 External Teeth UWE Slewing Bearing/slewing Ring